Thank you for choosing Our Driveway Alarm Security System! The Wuloo Motion Sensor with Wireless Motion Alert is a convenient and affordable safety/security system. The driveway alarm is one of our latest products. It serves a wide variety of uses and has multiple features, including all of the following. Weatherproof it can work well under rain and snow.
Outdoor sensor with adjustable sensitivity control. The sensor may be placed up to a 1/3 mile (1800ft) from the base unit in ideal condition.Alerts with light and sound when vehicles or pedestrians approach within a 30 feet radius. The sensor equipped with an 1800mA rechargeable battery (18650 Li-battery) with power shortage indicator built into the receiver screen. The receiver can be plugged in using included AC adapter or can run on (3) AA batteries. Long battery life of up to 12 months on a full charge with solar panel (depending on usage frequency). 8 levels of volume available, and 36 kinds of chimes to choose from.
FM wireless technology to work well without Wi-Fi. Expandable up to 8 different zones, it is perfect for home, business, property, and worksite. Also functions as clock or alarm, mute settings. Super simple to set up.Takes only a few minutes to set up. Easy do it yourself installation. The sensor can be powered by included rechargeable 18650 Li-battery.
1 x AC Adapter & Cable. False alarm, but there is nothing in front of the sensor when we check it. Cause 1: The sensitivity may be too high, causing little things like leaves or flies to be detected - Disassemble the sensor, and switch the sensitivity to a lower Level. Cause 2:The sun is shining directly into the sensor's eye.The sunlight may be increasing the sensor's temperature leading to false alarms - Install the sensor in another place that avoids direct sunlight from entering the sensor eye. No alarm: people walk in front of the sensor, but the sensor isn't making noise. Cause 1: The sensitivity is too low - Disassemble the sensor, and switch the sensitivity to a higher level. Cause 2: The angle of the sensor is not appropriate - Adjust the angle by using the sensor's ball-joint. The battery life of the sensor is short, will power off soon. Cause 1: The sensor was installed before being fully charged - After receiving the package, please fully charge the sensor before beginning installation.
Cause 2: The sensor has been placed in a high-traffic area; it may detect too many movements in a short amount of time - Please install the sensor in an area with lower traffic. Areas with high-traffic where many people are walking are not ideal for placement. The sensor can't work. Cause 1: The sensor isn't connecting with the inside battery - Please check the battery connection inside the sensor.Cause 2: The battery of the sensor has run down - Please recharge the sensor by using the included AC adapter. Cause 3: The sensor has been turned OFF and has not been turned back on - Press&Hold the POWER button to turn on the sensor.